RDL Dante
RDL 사의 단테 네트워크 오디오 방식 제품 안내
RDL 사의 Dante 제품은 전광방송을 위한 믹서, 파워앰프, 콘트롤러등과 프로 오디오를 위한 월마운트 오디오 인터페이스, 파워앰프, 콘트롤장치등 다양한 제품을 생산하고있습니다.
RDL사의 Format-A/Dante 호환 제품은 Format-A 시그널을 Dante 네트워크로 전송 시키거나 Dante 네트워크 시그널을 Format-A 로 전환하여 다양한 적용이 가능하도록 하고있습니다.
RDL 사의 Dante 제품은 네트워크를 통해 4채널의 오디오 전송과 수신이 가능합니다
신 제품 안내
New Products
EU-RN2ML
마이크/라인 입력 단테 인터페이스
- EU Series Dante or AES67 Network Interface for Two Audio Inputs
- One Balanced Front-Panel XLR Mic-Level or Line-Level Input
- One Line-Level Summed-to-Mono Mini-jack Input
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- RDL Studio-Quality Input Preamplifiers
- Preamplifiers are Independent from A to D Converters
- Software-Selected XLR Input Gain; Mic: 35 dB, 45 dB or 59 dB; Line: Unity or 12 dB
- P48 Mic Phantom Selected by Software for Mic Input
- Software-Selected Mini-jack Input Gain: Unity, Unity +5 dB, Unity -5 dB
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Analog to Digital Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
- 사용자 설명서 다운로드
EU-RN02
마이크 입력 단테 인터페이스
- EU Series Dante or AES67 Network Interface for Two Audio Inputs
- Two Front-Panel Mic/Line Inputs on Balanced XLR Jacks
- RDL Studio-Quality Preamplifiers for Mic Inputs
- Preamplifiers are Independent from A to D Converters
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Software-Selected Input Gain; Mic: 35 dB, 45 dB or 59 dB; Line: Unity or 12 dB
- P48 Mic Phantom Selected by Software for Mic Inputs
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Analog to Digital Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
- Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
- 사용자 설명서 다운로드
EU-RN02L
라인출력 단테 인터페이스
- EU Series Dante or AES67 Network Interface for Two Audio Outputs
- Two Balanced Line-Level Outputs on Front-Panel XLR Jacks
- Outputs Equipped with Software-Controlled Attenuator in 1 dB Steps
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Fits 60 mm Deep European Electrical Box Using Included Adapter Plate
-
Supplied With White Cover Plate and Alternate Black Front-Panel Laminate
- 사용자 설명서 다운로드
EU-BTN21
블루투스 오디오 단테 인터페이스
- Bluetooth Audio Input for Dante or AES67 Networked System
- Bluetooth Stereo or Mono Sum Feeds Two Network Channels
- Return Audio Talk Channel from Dante Network to Bluetooth-Connected Device
- Intuitive Single Button Bluetooth Pairing with LED Status Indication
- Bluetooth Functions are Controllable in RDL CONSOLE Software
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Controllable Functions Include Pairing/Un-pairing, Media Source Track Selection and Level
- Bluetooth Track Title and Artist Data are Multicast on the Network to Compatible Devices
- Customize the Module ID Name, Settings and Mono/Stereo Mode using RDL CONSOLE Software
- White Faceplate Laminate is Installed, Field-Replaceable Black Laminate Included
- European 45 mm x 45 mm Chassis Fits in a Standard 60 mm Deep EU Junction Box
- Module is PoE Powered
- 사용자 설명서 다운로드
DD-RN44
양방향 라인레벨 블루투스 오디오 단테 인터페이스
- Bluetooth Audio Input for Dante Networked System
- Consumer Audio Inputs on Mini-Jack or RCA Jacks
- Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Consumer Audio Outputs on Mini-Jack
- Balanced and Unbalanced Audio Line Outputs on Rear Panel
- Intuitive Single Button Bluetooth Pairing with LED Status Indication
- Bluetooth Settings Configurable via RDL Console 2.0 Software
- Customize the Module ID Name and Settings via RDL Console 2.0 Software
- Mono or Stereo Mode for Audio Inputs is Switch-Selectable Behind Cover Plate
- Module is PoE Powered
- 사용자 설명서 다운로드
DD-RN40
양방향 마이크/라인 단테 인터페이스 4×2
- Dante Network Interface for Four Audio Inputs and Two Audio Outputs
- Four XLR Front-Panel Inputs
- Two Outputs on Rear Panel Detachable Terminal Block
- Module is Configured and Adjusted Using Network Control Software
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Converts Four Standard XLR Mic or Line Audio Sources to Dante Network Channels
- Each Input Gain is Selected by Software
- Mic Gain: 35 dB, 42 dB or 59 dB
- Line Gain: Unity or 12 dB
- 48 V Mic Phantom (P48) Selected by Software
- Converts Two Dante Network Audio Signals to Line Level
- Each Output Equipped with Software Controlled Attenuator in 1 dB Steps
- Studio Quality, Low-Noise Performance
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- 사용자 설명서 다운로드
DD-RN31
양방향 마이크/라인 단테 인터페이스 4×4
- Dante Network Interface for Four Audio Inputs and Four Audio Outputs
- One Mini-jack, Two RCA Jacks and Two XLR Front-Panel Inputs
- One Mini-jack Front-Panel Output; Two Balanced Outputs on Rear-Panel Terminal Block
- Module is Configured and Adjusted Using Network Control Software
- Q-SYS Plug-In Available for Configuring in Q-SYS Environment
- Converts Two Standard XLR Mic or Line Audio Sources to Dante Network Channels
- Each Input Gain is Selected by Software
- Mic Gain: 35 dB, 42 dB or 59 dB
- Line Gain: Unity or 12 dB
- 48 V Mic Phantom (P48) Selected by Software
- Each Mini-jack and RCA -10 dBV Input May Feed One or Two Dante Network Channels
- Converts Four Dante Network Audio Signals to Line Level
- Mini-jack -10 dBV Stereo Output from Two Specific Dante Channels
- Rear Panel Balanced Outputs from Two Specific Dante Channels
- Each Rear Panel +4 dBu Output Equipped with Software Controlled Attenuator in 1 dB Steps
- Studio Quality, Low-Noise Performance
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- 사용자 설명서 다운로드
DD-BN40
양방향 마이크/라인 단테 인터페이스 4×2
- Dante Network Interface for Four Audio Inputs and Two Audio Outputs
- Four XLR Front-Panel Inputs
- Converts Four Standard XLR Mic or Line Audio Sources to Dante Network Channels
- Each XLR Input is Switch Selectable for Mic or Line
- Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
- Switch-Selectable 48 V Mic Phantom (P48)
- Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
- Converts Two Dante Network Audio Signals to Line Level
- Rear Panel Outputs Switch Selectable Balanced +4 dBu or Unbalanced -10 dBV
- Special Software Not Required for Module Setup
- Studio Quality, Low-Noise Performance
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- 사용자 설명서 다운로드
DD-BN31
양방향 마이크/라인 단테 인터페이스 4×4
- Dante Network Interface for Four Audio Inputs and Four Audio Outputs
- One Mini-jack and Two XLR Front-Panel Inputs
- One Mini-jack Front-Panel Output; Two Outputs on Rear-Panel Terminal Block
- Converts Two Standard XLR Mic or Line Audio Sources to Dante Network Channels
- Each XLR Input is Switch Selectable for Mic or Line
- Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
- Switch-Selectable 48 V Mic Phantom (P48)
- Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
- Mini-jack -10 dBV Input is Switch Selectable Stereo or Summed to Mono
- Converts Four Dante Network Audio Signals to Line Level
- Mini-jack -10 dBV Output is Switch Selectable Stereo or Mono (Left Channel)
- Rear Panel Outputs Switch Selectable Balanced +4 dBu or Unbalanced -10 dBV
- Special Software Not Required for Module Setup
- Studio Quality, Low-Noise Performance
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- 사용자 설명서 다운로드
DD-BN2ML
양방향 마이크/라인 단테 인터페이스 2x 2
- Dante Network Interface for Two Audio Inputs and Two Audio Outputs
- XLR and Mini-jack Front-Panel Inputs; Outputs on Rear-Panel Terminal Block
- Converts One Mic or Line and One Consumer Line Audio Source to Dante Network Channels
- Converts Two Dante Network Audio Signals to Line Level
- Special Software Not Required for Module Setup
- XLR Input is Switch Selectable for Mic or Line
- Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
- Switch-Selectable 48 V Mic Phantom (P48)
- Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
- Mini-jack -10 dBV Input is Summed to Mono
- Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV
- Studio Quality, Low-Noise Performance
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- 사용자 설명서 다운로드
DD-BN2M
양방향 마이크/라인 단테 인터페이스 2x 2
- Dante Network Interface for Two Audio Inputs and Two Audio Outputs
- Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
- Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
- Converts Two Dante Network Audio Signals to Line Level
- Special Software Not Required for Module Setup
- Each Input is Switch Selectable for Mic or Line
- Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
- Switch-Selectable 48 V Mic Phantom (P48)
- Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
- Each Output is Switch Selectable for Balanced +4 dBu or Unbalanced -10 dBV
- Studio Quality, Low-Noise Performance
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- 사용자 설명서 다운로드
DD-BN22
양방향 마이크/라인 단테 인터페이스 2x 2
- Dante Network Interface for Two Audio Inputs and Two Audio Outputs
- Inputs and Outputs on XLR Jacks on front panels
- Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
- Converts Two Dante Network Audio Signals to Mic or Line Level
- Special Software Not Required for Module Setup
- Each Input is Switch Selectable for Mic or Line
- Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
- Switch-Selectable 48 V Mic Phantom (P48)
- Switch-Selectable Line Gain: Unity, 12 dB or 19 dB
- Each Output is Switch Selectable for Mic or Line
- Studio Quality, Low-Noise Performance
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- 사용자 설명서 다운로드
D-BTN21
블루투스 오디오 단테 네트워크 인터페이스
- Bluetooth Audio Input for Dante or AES67 Networked System
- Bluetooth Stereo or Mono Sum Feeds Two Network Channels
- Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
- Intuitive Single Button Bluetooth Pairing with LED Status Indication
- Bluetooth Functions are Controllable in RDL CONSOLE Software
- Bluetooth Functions are Controllable using Compatible RDL Remote Controls
- Controllable Functions Include Pairing/Un-pairing, Media Source Track Selection and Level
- Bluetooth Track Title and Artist Data are Multicast on the Network to Compatible Devices
- Customize the Module ID Name, Settings and Mono/Stereo Mode using RDL CONSOLE Software
- Module is PoE Powered
- 사용자 설명서 다운로드
D-RN02
마이크/ 라인 단테 인터페이스
- Single-Gang Dante or AES67 Network Interface for Two Audio Outputs
- Two Balanced Outputs on Front Panel XLRs and on Rear Panel Detachable Wiring Block
- Front-Panel XLR Outputs are Software-Selectable for Mic or Line Level
- Outputs Equipped with Software-Controlled Attenuator in 1 dB Steps
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- 사용자 설명서 다운로드
D-RN12
마이크 / 라인 양방향 단테 인터페이스
- Single-Gang Dante or AES67 Network Interface for One Audio Input and Two Audio Outputs
- Front-Panel Mic/Line Input on Balanced XLR Jack
- Balanced Line Output on Front-Panel Mic/Line XLR and on Rear-Panel Detachable Wiring Block
- Additional Line Output on Rear-Panel Detachable Wiring Block
- Software-Selected Input Gain; Mic: 35 dB, 42 dB or 59 dB; Line: Unity or 12 dB
- P48 Mic Phantom Selected by Software for Mic Input
- Front-Panel XLR Output is Software-Selectable for Mic or Line Level
- Outputs Equipped with Software-Controlled Attenuator in 1 dB Steps
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- 사용자 설명서 다운로드
D-RN22
마이크 / 라인 단테 인터페이스
- Single-Gang Dante or AES67 Network Interface for Two Audio Inputs and Two Audio Outputs
- Two Front-Panel Mic/Line Inputs on Balanced XLR Jacks
- Two Balanced Rear-Panel Outputs on Detachable Wiring Block
- Software-Selected Input Gain; Mic: 35 dB, 42 dB or 59 dB; Line: Unity or 12 dB
- P48 Mic Phantom Selected by Software for Mic Inputs
- Outputs Equipped with Software-Controlled Attenuator in 1 dB Steps
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- 사용자 설명서 다운로드
D-RN2ML
마이크 / 라인 양방향 단테 인터페이스
- Single-Gang Dante or AES67 Network Interface for Two Audio Inputs and Two Audio Outputs
- One Balanced XLR Mic-Level or Line-Level Input
- One Line-Level Summed-to-Mono Mini-jack Input
- Two Balanced Rear-Panel Outputs on Detachable Wiring Block
- Software-Selected XLR Input Gain; Mic: 35 dB, 42 dB or 59 dB; Line: Unity or 12 dB
- P48 Mic Phantom Selected by Software
- Software-Selected Mini-jack Input Gain: Unity, +5 dB / -5 dB
- Outputs Equipped with Software-Controlled Attenuator in 1 dB Steps
- Module is Configured and Adjusted Using RDL CONSOLE or Other Network Control Software
- Compatible with RDL Network Remote Controls
- High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
- Legendary RDL Studio Quality, Low-Noise Performance
- 사용자 설명서 다운로드
NLC-1
단테 리모트콘트롤러
- Pushbutton Level Remote Control
- LED String Display
- Mute Button with LED Indicator
- Programmable Operation and Attenuation Steps
- Configurable for Buttons Always Enabled or Auto-Locking
- May Operate as a Controller or a Satellite
- Selectable as Satellite to a D-NMC1 or D-NLC1 Controller
- Compatible with DD-RN and Other RDL Products
- PoE Powered
- Available in Stainless Steel, Black and White
- 사용자 설명서 다운로드
NMC1
단테 리모트콘트롤러
- Individual or Group Level Adjustment
- Mute Button with Screen Indication
- Full-Color LCD Display
- Pushbutton Remote Control
- Up to 8 Source Selections with Dante Routings
- Sets or Clears Routings for Any Dante Device
- Fully Programmable Functions and Names
- Enable, Disable or Auto-Lock Each Function
- Capability to Set Gains and Levels
- May Operate as a Controller or a Satellite
- Selectable Screen Display Themes
- Compatible with DD-RN and Other RDL Products
- PoE Powered
- Available in Stainless Steel, Black and White
- 사용자 설명서 다운로드



















